PENGARUH WAKTU ELEKTROLISIS DAN PENGGUNAAN ANODA TIMAH HITAM DAN TEMBAGA TERHADAP LAJU PERUBAHAN TDS PADA SINTESIS SERBUK TEMBAGA DENGAN METODE ELEKTROLISIS

Syahputra, Farendra Wijaya (2024) PENGARUH WAKTU ELEKTROLISIS DAN PENGGUNAAN ANODA TIMAH HITAM DAN TEMBAGA TERHADAP LAJU PERUBAHAN TDS PADA SINTESIS SERBUK TEMBAGA DENGAN METODE ELEKTROLISIS. S1 thesis, Institut Teknologi Sains Bandung.

[thumbnail of TA_FARENDRA WIJAYA S_123.20.004_AWAL.pdf] Text
TA_FARENDRA WIJAYA S_123.20.004_AWAL.pdf

Download (182kB)
[thumbnail of TA_FARENDRA WIJAYA S_123.20.004_BAB 1.pdf] Text
TA_FARENDRA WIJAYA S_123.20.004_BAB 1.pdf

Download (162kB)
[thumbnail of TA_FARENDRA WIJAYA S_123.20.004_DAFTAR PUSTAKA.pdf] Text
TA_FARENDRA WIJAYA S_123.20.004_DAFTAR PUSTAKA.pdf

Download (132kB)
[thumbnail of TA_FARENDRA WIJAYA S_123.20.004_JURNAL.pdf] Text
TA_FARENDRA WIJAYA S_123.20.004_JURNAL.pdf
Restricted to Repository staff only

Download (470kB) | Request a copy

Abstract

Penelitian ini dilakukan untuk mengetahui pengaruh waktu elektrolisis terhadap laju Total Dissolved Solid (TDS) larutan elektrolisis serbuk tembaga jika menggunakan anoda tembaga dan timah hitam. Percobaan elektrolisis serbuk tembaga menggunakan katoda stainless steel 316 L. Kondisi operasional proses elektrolisis dilakukan di suhu ruangan, rapat arus 0,05A/m2 dan waktu elektrolisis adalah 70 menit dan 420 menit. Total Dissolved Solid larutan di tiap selang waktu diukur menggunakan TDS meter. Serbuk tembaga yang dihasilkan dikeringkan dalam oven pada suhu 100°C lalu ditimbang dan dihitung efisiensi arusnya. Serbuk tembaga pada efisiensi arus tertinggi kemudian dikarakterisasi dengan uji Scanning Electron Microscope (SEM) untuk mengetahui struktur morfologi serbuk, X-ray Diffraction (XRD) untuk mengetahui fasa yang terbentuk dan Particle Size Analyzer (PSA) untuk mengetahui distribusi ukuran serbuk tembaga. Rata-rata laju perubahan konsentrasi larutan elektrolit jika menggunakan anoda tembaga adalah 0,888 ppm/menit dan -0,322 ppm/menit jika menggunakan anoda timah hitam sedangkan jika menggunakan kombinasi 4 anoda tembaga 2 timah hitam adalah 0,067 ppm/menit dan 0,001 ppm/menit jika menggunakan kombinasi 2 anoda tembaga 4 timah hitam. Efisiensi arus sintesis elektrolisis serbuk tembaga berada pada rentang 69,58-96,1%. Serbuk yang dihasilkan memiliki bentuk dendritik dengan ukuran partikel rata-rata 1,008 µm, kemurnian 91,32% Cu, dengan senyawa Cu2O.--

This research was conducted to determine the effect of electrolysis time on the rate of Total Dissolved Solid (TDS) of copper powder electrolysis solution when using copper and lead anodes. The copper powder electrolysis experiment used a 316 L stainless steel cathode. The operational conditions for the electrolysis process were carried out at room temperature, the current density was 0.05A/m2 and the electrolysis time was 70 minutes and 420 minutes. Total Dissolved Solid solution at each time interval is measured using a TDS meter. The resulting copper powder is dried in an oven at a temperature of 100°C then weighed and the current efficiency calculated. Copper powder at the highest current efficiency was then characterized using a Scanning Electron Microscope (SEM) test to determine the morphological structure of the powder, X-ray Diffraction (XRD) to determine the phases formed and Particle Size Analyzer (PSA) to determine the size distribution of the copper powder. The average rate of change in concentration of the electrolyte solution when using a copper anode is 0.888 ppm/minute and -0.322 ppm/minute if using a lead anode, whereas if using a combination of 4 copper anodes 2 lead is 0.067 ppm/minute and 0.001 ppm/minute if using combination of 2 copper anodes 4 lead. The current efficiency of copper powder electrolysis synthesis is in the range of 69.58-96.1%. The resulting powder has a dendritic shape with an average particle size of 54.94 µm, purity of 98.78% Cu, with Cu2O compounds.

Item Type: Thesis (S1)
Contributors:
Contribution
Contributors/Pembimbing
NIDN
Thesis advisor
Wahyudi, Soleh
NIDN0410017105
Uncontrolled Keywords: Serbuk Tembaga, Elektrolisis, Tembaga, Timah Hitam, TDS
Subjects: T Technology > TK Electrical engineering. Electronics Nuclear engineering
T Technology > TN Mining engineering. Metallurgy
Divisions: Fakultas Teknik dan Desain > Teknik Metalurgi
Depositing User: Perpustakaan ITSB
Date Deposited: 15 Nov 2024 09:35
Last Modified: 28 Nov 2024 05:25
URI: https://repository.itsb.ac.id/id/eprint/992

Actions (login required)

View Item
View Item